There is a significant issue with the position of the hole for the tap. The hole is positioned so close to the lip of the sink that when you place a mixer in it - the foot of the mixer hits the lip and therefore cant sit flush against the sink. Basically, the tap hole is about 3mm from the lip, so if you have a mixer with a 35mm cartridge (the bit that pokes down through the hole) and the foot of the mixer (the bit that sits above the hole) has a diameter of anything over 40mm then the back of it will hit the lip. We had to file out the front of the hole so the tap could move forward about 4mm so that the tap could sit flat. Initially we thought this was just an error on the one we purchased but checked another one of the same model and that was exactly the same. Otherwise the sink itself looks fine but the fact that a lot of taps will not fit (despite having the right size cartridgemakes it a pain. If you can find this product in store and make sure the tap you want fits then it still might be ok for you.

Scratches and marks very easily. Have to use protective cover on drainer side if you put anything on surface eg. dish drainer or kitchen utensils. Top surface and edges scratch easily, after one month looks old and used. Not a good product. Manufacturers fault. This is not a reflection on Appliances on Line as they always provide great customer service.

Overall, the sink is very good, easy to install, not too shallow and a nice satin stainless finish. It didn't however come with a bench top cutout template and there was no tap hole as per listed in the product specification, so I had to buy a tool to cut it myself - luckily I have done this before.