To clean a washing machine, empty the drum, clean the detergent dispenser and accessible seals, then run the cleaning cycle recommended in your user manual. Check any user-accessible filters too, as these need separate attention.
Whether you have a front loader or top loader, start with your model’s instructions. Cleaning products, cycle settings and removable parts vary between machines.
Remove all clothing and check the drum for loose items. Look in your manual for a program called Drum Clean, Tub Clean, Self Clean or a similar name.
Check whether the program needs a washing machine cleaner or should run without additives. If your washer doesn’t have a dedicated cleaning program, follow the alternative method specified by its manufacturer.
For manual cleaning, switch the machine off and unplug it first.
Remove the drawer only if your manual explains how to release it. Rinse washable parts with warm water and use a soft brush to loosen residue in corners and around removable inserts.
Wipe the accessible drawer recess with a damp cloth, then refit everything as directed. Automatic dosing systems can have different cleaning requirements, so check their instructions before removing or rinsing components.
On a front loader, gently check the folds of the rubber door seal for trapped lint, hair and small items. Wipe accessible surfaces with a soft, damp cloth, then dry them.
On a top loader, wipe around the lid, tub rim and accessible dispenser areas. Don’t remove the agitator or drum unless the manufacturer specifically identifies this as a user maintenance task.
Use only cleaning products approved for the surface and your model.
Overloading your washing machine can cause strain on the motor and other components, leading to premature wear and tear. Always adhere to the manufacturer's guidelines regarding load size.
When the program finishes and the machine is safe to open, check for loosened residue and wipe accessible surfaces. Allow the interior to dry between washes where it is safe to do so. Keep children and pets away from an open machine.
Check your manual to find out which filters your machine has and which you can clean yourself. A front loader’s drain pump filter and a top loader’s lint filter perform different jobs and may need different care.
For a removable lint filter, follow the instructions for releasing, cleaning and refitting it. Don’t force a stuck filter or remove panels that aren’t intended for user access.
Use your manufacturer’s cleaning schedule rather than assuming every filter needs the same maintenance.
Follow your machine’s cleaning reminder or the schedule in its manual. How often it needs attention can depend on your model and how you use it. Between cleaning cycles, check the seal, dispenser and accessible surfaces for residue. Clean up spills promptly and use the detergent type and dose recommended for your machine and laundry load. Filters have their own maintenance requirements, so include them in your routine rather than relying on the drum-cleaning cycle alone.
Cleaning is a useful first step, but recurring faults may need a repair assessment. If you’re comparing replacement options, explore our washing machines and compare capacity, dimensions, energy and water ratings, and the programs you’ll use most.
Prefer a familiar design? Browse front load washing machines, or compare the top load options available through our washing machine range.
When you’re ready to upgrade, eligible orders include free connection and free removal and recycling of your old disconnected appliance. Check the service conditions and delivery options for your address before ordering.
Check your manual before using household cleaning ingredients. Vinegar and baking soda aren’t suitable substitutes for every machine’s recommended cleaning method. Some manufacturers advise against vinegar because it can damage rubber parts. A dedicated cleaning cycle may also need to run without any added cleaner.
Follow your manufacturer’s instructions for cleaning or disinfecting the machine. Don’t assume a normal hot wash or general cleaner provides a verified disinfection result. If a product is recommended, check that it is suitable for your washer and follow both the appliance instructions and the product label. Never mix cleaning products, particularly bleach with vinegar or other acids.
Check whether you’ve cleaned all the user-accessible areas listed in your manual, including the detergent dispenser, door seal and relevant filters. A drum-cleaning cycle doesn’t replace cleaning these parts. If the smell persists after the recommended maintenance, or comes with drainage problems or leaks, contact the manufacturer or a qualified technician. Repeatedly adding stronger cleaning products may not address the cause.
If you notice a damaged hose or recurring leak, stop using the machine and arrange appropriate assistance.